ورود / عضویت



آمار بازدیدها

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday179
mod_vvisit_counterYesterday922
mod_vvisit_counterThis week9165
mod_vvisit_counterLast week2050
mod_vvisit_counterThis month12466
mod_vvisit_counterLast month8381
mod_vvisit_counterAll days2005625
فروش استاندارد aws 2013
فروش استاندارد AWS دانلود استاندارد AWS 2013 مشاهده در قالب PDF چاپ فرستادن به ایمیل
نوشته شده توسط Administrator   
چهارشنبه, 17 مهر 1392 ساعت 11:57

 جزئیات آرشیو کامل استاندارد AWS 2013 

قیمت (تومان)

سایز GB

تعداد

ویرایش

موضوع

نام استاندارد

600,000

1.3

323

فول آپدیت از 1925 تا سال 2013

انجمن مهندسي جوش آمريكا

AWS 2013

          لطفا برای سفارش استاندرادهای تکی یا آرشیو کامل با 09121554226 و یا 48041110 تماس بگیرید   آدرس ایمیل جهت جلوگیری از رباتهای هرزنامه محافظت شده اند، جهت مشاهده آنها شما نیاز به فعال ساختن جاوا اسکریپت دارید

 

برای مشاهده قیمت و جزئیات سایر استانداردها  اینجا  کلیک کنید 

 ASME , ISO , API , IEC , DIN , BS EN, NFPA , IEEE, ANSI , UL , SAE , AWS , ASTM 

 

 

لیست کامل استانداردهای AWS

Metric Practice Guide for the Welding Industry 2001.01.01 AWS A1.1
Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding - 1st Edition 2007.03.05 AWS A10.1M
A2.1:2007-WC &amp 2012.01.01 AWS A2.1-WCXL
Standard Symbols for Welding, Brazing, and Nondestructive Examination - 7th Edition 2012.01.01 AWS A2.4
Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying - 12th Edition 2010.01.01 AWS A3.0M/A3.0
Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal 2006.01.01 AWS A4.2M
Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding 1993.01.01 AWS A4.3
Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings 2001.01.01 AWS A4.4M
Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld - 1st Edition 2012.01.01 AWS A4.5M/A4.5
Procurement Guidelines for Consumables-Welding and Allied Processes-Flux and Gas Shielded Electrical Welding Processes - Fourth Edition 2008.01.01 AWS A5.01M/A5.01
Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes - First Edition 2007.01.01 AWS A5.02/A5.02M
Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding - 14th Edition 2012.01.01 AWS A5.1/A5.1M
Welding Consumables - Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys - Classification - 10th Edition 2012.01.01 AWS A5.10/A5.10M
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding - 10th Edition 2010.01.01 AWS A5.11/A5.11M
Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting - Seventh Edition 2009.01.01 AWS A5.12M/A5.12
Specification for Surfacing Electrodes for Shielded Metal Arc Welding - 5th Edition 2010.01.01 AWS A5.13/A5.13M
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods - Tenth Edition 2011.01.01 AWS A5.14/A5.14M
Specification for Welding Electrodes and Rods for Cast Iron 1990.01.01 AWS A5.15
Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods - 6th Edition 2013.01.01 AWS A5.16/A5.16M
Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding 1997.01.01 AWS A5.17/A5.17M
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding 2005.01.01 AWS A5.18/A5.18M
Specification for Magnesium Alloy Welding Electrodes and Rods 1992.01.01 AWS A5.19
Specification for Carbon and Low- Alloy Steel Rods for Oxyfuel Gas Welding 2007.01.01 AWS A5.2/A5.2M
Specification for Bare Electrodes and Rods for Surfacing - 5th Edition 2011.01.01 AWS A5.21/A5.21M
Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods - 5th Edition 2012.01.01 AWS A5.22/A5.22M
Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding - Sixth Edition 2011.01.01 AWS A5.23/A5.23M
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods 2005.01.01 AWS A5.24/A5.24M
Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding 1997.01.01 AWS A5.25/A5.25M
Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding 1997.01.01 AWS A5.26/A5.26M
Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding - Third Edition 2005.01.01 AWS A5.28/A5.28M
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding - Fourth Edition 2010.01.01 AWS A5.29/A5.29M
Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding 1999.01.01 AWS A5.3/A5.3M
Specification for Consumable Inserts - 3rd Edition 2007.01.01 AWS A5.30/A5.30M
Specification for Fluxes for Brazing and Braze Welding - 2nd Edition 2012.01.01 AWS A5.31M/A5.31
Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes - 2nd Edition 2011.01.01 AWS A5.32M/A5.32
Specification for Nickel-Alloy Electrodes for Flux Cored ArcWelding - 1st Edition 2007.01.01 AWS A5.34/A5.34M
Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding - 1st Edition 2012.01.01 AWS A5.36/A5.36M
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding - 11th Edition 2012.01.01 AWS A5.4/A5.4M
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding 2006.01.01 AWS A5.5/A5.5M
Specification for Copper and Copper-Alloy Electrodes for Shielded Metal ArcWelding - 9th Edition 2008.01.01 AWS A5.6/A5.6M
Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes - 7th Edition 2007.01.01 AWS A5.7/A5.7M
Specification for Filler Metals for Brazing and Braze Welding - 10th Edition 2011.01.01 AWS A5.8M/A5.8
Specification for Filler Metals for Brazing and Braze Welding - 10th Edition 2012.01.01 AWS A5.8M/A5.8-AMD 1
Specification for Bare Stainless Steel Welding Electrodes and Rods - 8th Edition 2012.01.01 AWS A5.9/A5.9M
Guide for Verification and Validation in Computation Weld Mechanics - 1st Edition 2013.01.01 AWS A9.5
Study Guide for API Standard 1104 Welding of Pipelines and Related Facilities - TWENTIETH EDITION 2008.01.01 AWS API-M
Arc Welding and Cutting Noise 1979.01.01 AWS AWN
Contents 1979.01.01 AWS AWS FUMES AND GASES
HANDBOOK OF PLASTICS JOINING 2008.01.01 AWS AWS HPJ
Guide for the Nondestructive Examination of Welds - 4th Edition 2009.01.01 AWS B1.10M/B1.10
Guide for the Visual Examination of Welds 2000.01.01 AWS B1.11
Specification for Welding Procedure and Performance Qualification - Fifth Edition 2009.01.01 AWS B2.1/B2.1M
Base Metal Grouping for Welding Procedure and Performance Qualification - Second Edition 2009.01.01 AWS B2.1/B2.1M-BMG
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8 or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1/8-006
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1, S-1 to M-8, P-8, or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1/8-010
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8/P-8/S-8, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1/8-014
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER309(L), As-Welded Condition, Primarily Pipe Applications Site License - with Amendment 1: 2010 2002.01.01 AWS B2.1-1/8-227
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, E309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe Applications Site License 2002.01.01 AWS B2.1-1/8-228
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/ S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/ P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER309(L) and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe Applications Site License - Incorporates Errata: 5/2006 2002.01.01 AWS B2.1-1/8-229
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applications Site License - Incorporates Amendment 1 2002.01.01 AWS B2.1-1/8-230
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8,Group 1),1/8 through 1-1/2 inch Thick, IN309, ER309, and E309-15, -16, or -17,or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe 2002.01.01 AWS B2.1-1/8-231
Standard Welding Procedure Specification (WPS) for Site License Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the As-Welded Condition, With Backing 1990.01.01 AWS B2.1-1-001
Standard Welding Procedure Specification (WPS) for Site License Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing 1990.01.01 AWS B2.1-1-002
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Galvanized Steel, (M-1), 18 Through 10 Gauage, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1-003
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Carbon Steel (M-1, Group 1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1-004
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1-007
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, P-1, or S-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1-008
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing Site License - Incorporates Errata: 01/2005 2002.01.01 AWS B2.1-1-011
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-1-012
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition Site License 1994.01.01 AWS B2.1-1-016
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition Site License 1994.01.01 AWS B2.1-1-017
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition Site License 1994.01.01 AWS B2.1-1-018
Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition Site License 1994.01.01 AWS B2.1-1-019
Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition Site License 1994.01.01 AWS B2.1-1-020
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition Site License 1994.01.01 AWS B2.1-1-021
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition Site License 1994.01.01 AWS B2.1-1-022
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition Site License 1994.01.01 AWS B2.1-1-026
Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1, Groups 1 and 2), 1/8 through 1/2 inch Thick, E71T-11, As-Welded Condition, Primarily Plate and Structural Applications Site License - Third Edition 2011.01.01 AWS B2.1-1-027
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License 1996.01.01 AWS B2.1-1-201
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License 1996.01.01 AWS B2.1-1-202
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pipe Applications) Site License 1996.01.01 AWS B2.1-1-203
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License 1996.01.01 AWS B2.1-1-204
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications Site License 1996.01.01 AWS B2.1-1-205
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications 1996.01.01 AWS B2.1-1-206
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe Applications) Site License 1996.01.01 AWS B2.1-1-207
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) 1996.01.01 AWS B2.1-1-208
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) Site License 1996.01.01 AWS B2.1-1-209
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications Site License 2001.01.01 AWS B2.1-1-210
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications 2001.01.01 AWS B2.1-1-211
Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3 and E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Application 2006.01.01 AWS B2.1-1-232
Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, As-Welded or PWHT Condition, Primarily Pipe Applications 2006.01.01 AWS B2.1-1-233
Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applications 2006.01.01 AWS B2.1-1-234
Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condition, Primarily Pipe Applications 2006.01.01 AWS B2.1-1-235
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Aluminum (M/P-22 to M/P-22), 18 through 10 Gauge, ER4043 or R4043, in the As-Welded Condition, with or without Backing Site License - 3rd Edition 2011.01.01 AWS B2.1-22-015
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-4-217
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-4-218
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-4-219
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-4-220
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-4-221
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-5A-222
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-5A-223
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-5A-224
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-5A-225
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition 1999.01.01 AWS B2.1-5A-226
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-8-005
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-8-009
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/ P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing Site License 2002.01.01 AWS B2.1-8-013
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition Site License 1994.01.01 AWS B2.1-8-023
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER3XX, As-Welded Condition, Primarily Plate and Structural Applications - 3rd Edition 2001.01.01 AWS B2.1-8-024
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER3XX and E3XX-XX, As-Welded Condition, Primarily Plate and Structural Applications - 3rd Edition 2001.01.01 AWS B2.1-8-025
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications - Third Edition 2001.01.01 AWS B2.1-8-212
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, E3XX-XX, As-Welded Condition, Primarily Pipe Applications - 1st Edition 1997.01.01 AWS B2.1-8-213
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER3XX and E3XX-XX, As-Welded Condition, Primarily Pipe Applications - 3rd Edition 2001.01.01 AWS B2.1-8-214
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications - 3rd Edition 2001.01.01 AWS B2.1-8-215
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX, ER3XX, and E3XX-XX, As-Welded Condition, Primarily Pipe Applications - 3rd Edition 2001.01.01 AWS B2.1-8-216
Specification for Brazing Procedure and Performance Qualification - 3rd Edition 2010.01.01 AWS B2.2/B2.2M
Specification for Soldering Procedure and Performance Qualification - 2nd Edition 2012.01.01 AWS B2.3/B2.3M
Specification for Welding Procedure and Performance Qualification for Thermoplastics - 2nd Edition 2012.01.01 AWS B2.4
Standard Methods for Mechanical Testing of Welds - 7th Edition 2007.01.01 AWS B4.0
Standard Methods for Mechanical Testing ofWelds - 1st Edition 2000.01.01 AWS B4.0M
Specification for the Qualification of Welding Inspectors - 2nd Edition 2013.01.01 AWS B5.1
Specification for the Qualification of Welding Sales Representatives - 2nd Edition 2009.01.01 AWS B5.14
Specification for the Qualification of Radiographic Interpreters - Second Edition 2010.01.01 AWS B5.15
Specification for the Qualification of Welding Engineers 2006.01.01 AWS B5.16
Specification for the Qualification of Welding Fabricators - Third Edition 2008.01.01 AWS B5.17
Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants 2001.01.01 AWS B5.2
Specification for the Qualification of Welder Test Facilities 2005.03.11 AWS B5.4
Specification for the Qualification of Welding Educators - 2nd Edition 2011.01.01 AWS B5.5
Specification for the Qualification of Welding Supervisors 2006.01.01 AWS B5.9
Brazing Footprints 2003.01.01 AWS BFP
Brazing Handbook - Fifth Edition 2007.01.01 AWS BRH
Recommended Practices for Resistance Welding - 5th Edition 2012.01.01 AWS C1.1M/C1.1
Specification for Resistance Welding of Carbon and Low-Alloy Steels - Second Edition 2009.01.01 AWS C1.4M/C1.4
Specification for the Qualification of Resistance Welding Technicians - Second Edition 2009.01.01 AWS C1.5
Guide for Thermal-Spray Operator Qualification 2002.01.01 AWS C2.16/C2.16M
Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites - Incorporating Errata 1993 1993.01.01 AWS C2.18
Specificatiopn for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete 2002.01.01 AWS C2.20/C2.20M
Specification for Thermal Spray Equipment Acceptance Inspection 2003.01.01 AWS C2.21M/C2.21
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel 2003.01.01 AWS C2.23M/C2.23
Specification for Thermal Spray Feedstock - Wire and Rods - 2nd Edition 2012.09.05 AWS C2.25/C2.25M
Specification for Torch Soldering - First Edition 2011.01.01 AWS C3.11M/C3.11
Standard Method for Evaluating the Strength of Brazed Joints - Fourth Edition 2008.01.01 AWS C3.2M/C3.2
Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components - Third Edition 2008.01.01 AWS C3.3
Specification for Torch Brazing - second edition 2007.01.01 AWS C3.4M/C3.4
Specification for Induction Brazing - 2nd Edition 2007.01.01 AWS C3.5M/C3.5
Specification for Furnace Brazing - Third Edition 2008.01.01 AWS C3.6M/C3.6
Specification for Aluminum Brazing - 4th Edition 2011.01.01 AWS C3.7M/C3.7
SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS - 3rd Edition 2011.01.01 AWS C3.8M/C3.8
Specification for Resistance Brazing - First Edition 2009.01.01 AWS C3.9M/C3.9
Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation - Second Edition 2009.01.01 AWS C4.2/C4.2M
Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation - Third Edition 2007.01.01 AWS C4.3/C4.3M
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches - Second Edition 2007.01.01 AWS C4.4/C4.4M
Uniform Designation System for Oxyfuel Nozzles - 3rd Edition 2012.01.01 AWS C4.5M
Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances - 1st Edition 2006.01.01 AWS C4.6M
Recommended Practices for Plasma-Arc Welding 1973.01.01 AWS C5.1
Recommended Practices for Shielding Gases for Welding and Cutting 2003.01.01 AWS C5.10/C5.10M
Recommended Practices for Plasma Arc Cutting and Gouging 2001.01.01 AWS C5.2
Recommended Practices for Air Carbon Arc Gouging and Cutting 2000.01.01 AWS C5.3
Recommended Practices for Stud Welding - 2nd Printing 1993.01.01 AWS C5.4
Recommended Practices for Gas Tungsten Arc Welding 2003.01.01 AWS C5.5/C5.5M
Recommended Practices for Gas Metal Arc Welding 1989.01.01 AWS C5.6
Recommended Practices for Electrogas Welding 2000.01.01 AWS C5.7
Recommended Practices for Friction Welding - First Edition 1989.01.01 AWS C6.1
Specification for Friction Welding of Metals 2006.01.01 AWS C6.2/C6.2M
Recommended Practices for Electron Beam Welding 2004.01.01 AWS C7.1M/C7.1
Recommended Practices for Laser Beam Welding, Cutting, and Allied Processes - 2nd Edition 2010.01.01 AWS C7.2M
Process Specification for Electron Beam Welding 1999.01.01 AWS C7.3
Process Specification and Operator Qualification for Laser Beam Welding - First Edition 2008.01.01 AWS C7.4/C7.4M
Characterization of Arc Welding Fume 1983.03.01 AWS CAWF
Certification Manual for Welding Inspectors - Fourth Edition 2000.01.01 AWS CM
CERTIFIED WELDING SUPERVISOR MANUAL FOR QUALITY AND PRODUCTIVITY IMPROVEMENT 2005.01.01 AWS CMWS
CODE CLINIC For Study of AWS D1.1/D1.1M: 2010 Structural Welding Code-Steel 2010.01.01 AWS D1.1 CCRM
Structural Welding Code - Steel - 22nd Edition 2010.01.01 AWS D1.1/D1.1M
A Collection of Responses to Formal Inquiries about the Requirements of AWS D1.1 (1976–2008) - Second Edition 2008.01.01 AWS D1.1-BI
Structural Welding Code- Aluminum - Fifth Edition 2008.01.01 AWS D1.2/D1.2M
Structural Welding Code - Sheet Steel - 5th Edition 2008.01.01 AWS D1.3/D1.3M
Structural Welding Code-Reinforcing Steel - 7th Edition 2011.01.01 AWS D1.4/D1.4M
Bridge Welding Code - 6th Edition 2010.01.01 AWS D1.5M/D1.5
Structural Welding Code- Stainless Steel 2007.01.01 AWS D1.6/D1.6M
Guide for Strengthening and Repairing Existing Structures 2010.01.01 AWS D1.7/D1.7M
Structural Welding Code-Seismic Supplement - Second Edition 2009.01.01 AWS D1.8/D1.8M
Structural Welding Code- Titanium - 1st Edition 2007.01.01 AWS D1.9/D1.9M
Recommended Practices for Local Heating of Welds in Piping and Tubing - 3rd Edition 1999.01.01 AWS D10.10/D10.10M
Guide for Root Pass Welding of Pipe Without Backing 2007.01.01 AWS D10.11M/D10.11
Guide for Welding Mild Steel Pipe 2000.01.01 AWS D10.12M/D10.12
Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems 2001.01.01 AWS D10.13/D10.13M
Guide for Multipass Orbital Machine Pipe Groove Welding - First Edition 2010.01.01 AWS D10.14M/D10.14
Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing - First Edition 2008.01.01 AWS D10.18M/D10.18
Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing 1986.01.01 AWS D10.4
Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing 2000.01.01 AWS D10.6/D10.6M
Guide for the Gas Shielded ArcWelding of Aluminum and Aluminum Alloy Pipe - 4th edition 2008.01.01 AWS D10.7M/D10.7
Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing 1996.01.01 AWS D10.8
Guide for Welding Iron Castings 1989.01.01 AWS D11.2
Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment 2005.01.01 AWS D14.1/D14.1M
Specification for Welding Earthmoving, Construction, and Agricultural Equipment - Sixth Edition 2010.01.01 AWS D14.3/D14.3M
Specification for the Design of Welded Joints in Machinery and Equipment - 4th Edition 2012.01.01 AWS D14.4/D14.4M
Specification for Welding of Presses and Press Components - 3rd Edition 2009.01.01 AWS D14.5/D14.5M
Specification for Welding of Rotating Elements of Equipment - 4th Edition 2012.01.01 AWS D14.6/D14.6M
Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls - 1st Edition 2005.01.01 AWS D14.7/D14.7M
Standard Methods for the Avoidance of Cold Cracks - First Edition 2009.01.01 AWS D14.8M
Specification for the Welding of Hydraulic Cylinders - First Edition 2013.01.01 AWS D14.9/D14.9M
Railroad Welding Specification for Cars and Locomotives - Fifth Edition 2012.01.01 AWS D15.1/D15.1M
Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles - 3rd Edition 2013.01.01 AWS D15.2/D15.2M
Specification for Robotic Arc Welding Safety 2004.01.01 AWS D16.1M/D16.1
Guide for Components of Robotic and Automatic Arc Welding Installations 2007.01.01 AWS D16.2M/D16.2
Risk Assessment Guide for Robotic Arc Welding - 2nd Edition 2009.01.01 AWS D16.3M/D16.3
Specification for the Qualification of Robotic Arc Welding Personnel - 2nd Editon 2005.01.01 AWS D16.4M/D16.4
Specification for Fusion Welding for Aerospace Applications - 2nd Edition 2010.01.01 AWS D17.1/D17.1M
Specification for Resistance Welding for Aerospace Applications. - 2nd Edition 2013.01.01 AWS D17.2/D17.2M
Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications - 1st Edition 2010.01.01 AWS D17.3/D17.3M
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications - 2nd Edition 2009.01.01 AWS D18.1/D18.1M
Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications 2005.01.01 AWS D18.3/D18.3M
Guide for Steel Hull Welding 1993.01.01 AWS D3.5
Underwater Welding Code - 5th Edition 2010.01.01 AWS D3.6M
Guide for Aluminum Hull Welding 2004.01.01 AWS D3.7
Specification for Classification of Weld-Through Paint Primers - 1st Edition 2010.01.01 AWS D3.9
Specification for Automotive Weld Quality- Arc Welding of Aluminum - Second Edition 2008.01.01 AWS D8.14M
Specification for Automotive Weld Quality- Resistance Spot Welding of Steel 2007.01.01 AWS D8.1M
Specification for Automotive Resistance Spot Welding Electrodes - Supplement to RWMA Bulletin 16 2005.01.01 AWS D8.6
Recommended Practices for Automotive Weld Quality Resistance SpotWelding 2005.01.01 AWS D8.7M
Specification for Automotive Weld Quality-Arc Welding of Steel 2007.01.01 AWS D8.8M
Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials - Third Edition 2012.01.01 AWS D8.9M
Sheet Metal Welding Code - 6th Edition 2012.01.01 AWS D9.1M/D9.1
Design and Planning Manual for Cost-Effective Welding 1999.01.01 AWS DPW
Guide for the Training of Welding Personnel: Level I-Entry Welder 2008.01.01 AWS EG2.0
Guide for the Training and Qualification of Welding Personnel Level II - Advanced Welder 1996.01.01 AWS EG3.0
Guide for the Training and Qualification of Welding Personnel Level III - Expert Welder 1996.01.01 AWS EG4.0
Effects of Welding on Health I 1979.01.01 AWS EWH-1
Effects of Welding on Health X (1992 - 1994) 1998.01.01 AWS EWH-10
Effects of Welding on Health, XI 2001.01.01 AWS EWH-11
Effects of Welding on Health, XII 2003.01.01 AWS EWH-12
Effects of Welding on Health, XIII 2007.01.01 AWS EWH-13
Effects of Welding on Health II 1981.01.01 AWS EWH-2
Effects of Welding on Health III 1983.01.01 AWS EWH-3
Effects of Welding on Health IV 1983.01.01 AWS EWH-4
Effects of Welding on Health V 1987.01.01 AWS EWH-5
Effects of Welding on Health VI 1989.01.01 AWS EWH-6
Effects of Welding on Health VII 1990.01.01 AWS EWH-7
Effects of Welding on Health VIII 1994.01.01 AWS EWH-8
Effects of Welding on Health IX 1995.01.01 AWS EWH-9
Effects of Welding on Health, Index-I through XIV 2012.01.01 AWS EWH-I
Method for Sampling Airborne Particulates Generated by Welding and Allied Processes 2006.01.01 AWS F1.1M
Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes - 6th Edition 2013.01.01 AWS F1.2
A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment 2006.01.01 AWS F1.3M
Methods for Sampling and Analyzing Gases from Welding and Allied Processes 2003.01.01 AWS F1.5M
Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting 2003.01.01 AWS F1.6
Lens Shade Selector 2001.01.01 AWS F2.2
Specification for Use and Performance of Transparent Welding Curtains and Screens - 2nd Edition 2011.01.01 AWS F2.3M
Ventilation Guide for Weld Fume 2001.01.01 AWS F3.2M/F3.2
Safe Practices for the Preparation of Containers and Piping forWelding and Cutting - Fifth edition 2007.01.01 AWS F4.1
Filler Metal Comparison Charts 2000.01.01 AWS FMC
Design Handbook for Calculating Fillet Weld Sizes 1997.01.01 AWS FWSH
Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds 2001.01.01 AWS G1.10M
Guide to Ultrasonic Assembly of Thermoplastics 2006.01.01 AWS G1.1M/G1.1
Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics - First Edition 1999.01.01 AWS G1.2M/G1.2
Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds 2006.01.01 AWS G1.6
Guide for the Joining of Wrought Nickel-Based Alloys 2012.01.01 AWS G2.1M/G2.1
Guide for the Joining of Solid Solution Austenitic Stainless Steels - 2nd Edition 2012.01.01 AWS G2.3M/G2.3
Guide for the Fusion Welding of Titanium and Titanium Alloys 2007.01.01 AWS G2.4/G2.4M
Guide for the Fusion Welding of Zirconium and Zirconium Alloys - 1st Edition 2012.01.01 AWS G2.5/G2.5M
Guide to Weldability Carbon and Low Alloy Steels 2005.01.01 AWS GTW
Guide for the Design of a Welder Training Facility 1998.01.01 AWS GWF
AWS HST INCH HANDS-ON, SELF-TRAINING INCLUDES THE FOLLOWING: AWS B1.10, AWS B1.11, AWS VIW-M AND THE WELDING INSPECTOR'S TOOLKIT IN INCH - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide. 2009.01.01 AWS HST INCH
AWS HST METRIC HANDS-ON, SELF-TRAINING INCLUDES THE FOLLOWING: AWS B1.10, AWS B1.11, AWS VIW-M AND THE WELDING INSPECTOR'S TOOLKIT IN METRIC - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide.   AWS HST METRIC
INTERNATIONAL BRAZING &amp 2009.01.01 AWS IBSC
AWS PUBLICATIONS CATALOG - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide 2011.01.01 AWS INDEX
Jefferson´s Welding Encyclopedia - Eighteenth Edition 1997.01.01 AWS JWE
Laboratory Validation of Ozone Sampling with Spill-Proof Impingers 1983.01.01 AWS LVOS
The Professional's Advisor on Procedure Qualification Variables/Cross Reference - Tables for AWS D1.1, AWS D1.5, AWS B2.1, ASME IX, and API 1104 2005.01.01 AWS PAPQV
The Professionals Advisor on Arc Welding Power Sources and Related Equipment 1999.01.01 AWS PAPS
The Professional´s Advisor on Resistance Welding 1998.01.01 AWS PARW
Professional´s Advisor on Welding Stainless Steels 1999.01.01 AWS PASS
STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS 2007.01.01 AWS QC1
Specification for Qualification and Certification of Level I-Entry Welder 2008.01.01 AWS QC10
Specification for Qualification and Certification for Level II - Advanced Welders 1996.01.01 AWS QC11
Specification for Qualification and Certification for Level III - Expert Welders 1996.01.01 AWS QC12
Specification for the Certification of Welding Sales Representatives - 1st Edition 2009.01.01 AWS QC14
STANDARDS FOR THE AWS CERTIFICATION OF ROBOTIC ARC WELDING PERSONNEL 2002.01.01 AWS QC19
Specification for AWS Certification of Resistance Welding Technicians - 1st Edition 2011.01.01 AWS QC20
Standard for Accreditation of Test Facilities for AWS Certified Welder Program 1989.01.01 AWS QC4
Standard for Certification of Welding Educators 1991.01.01 AWS QC5
Standard for AWS Certified Welders 1993.01.01 AWS QC7
Supplement C- Welder Performance Qualification Sheet Metal Test Requirements 1993.01.01 AWS QC7 SUPP C
Supplement F-Chemical Plant and Petroleum Refinery Piping 1993.01.01 AWS QC7 SUPP F
Supplement G-AWS Performance Qualification Test 1993.01.01 AWS QC7 SUPP G
Resistance Welding Manual - 4th Edition 2003.01.01 AWS RWM
Maintenance Manual for Resistance Welding Machines 1996.01.01 AWS RWMA BULLETIN 14
Resistance Welding Equipment Standards 1996.08.01 AWS RWMA BULLETIN 16
Manufacturer's Cross References of Standard Resistance Welding Electrode Numbers and Alloys 1997.01.01 AWS RWMA BULLETIN 34
Resistance Welding Control Standard 1994.01.01 AWS RWMA BULLETIN 5
Resistance Welding Pocket Handbook - 1st Edition 2011.01.01 AWS RWPH
The Independent Shop s Guide to Welding Safety and Health 2003.01.01 AWS SGSH
Soldering Handbook - Third Edition 2000.01.01 AWS SHB
Safety and Health Fact Sheets - Third Edition 2003.01.01 AWS SHF
Safe Practices - Reprint of WHB-1 CH 16 1988.01.01 AWS SP
Welded Joint Details for Structural Applications,Oversized Wall Chart Based on D1.1 2008.01.01 AWS SWJ-WC
Thermal Spray Manual - A Practicle Reference Guide 1996.01.01 AWS TSM
Thermal Spraying - Practice, Theory, and Application 1985.01.01 AWS TSS
TOTAL WELDING MANAGEMENT EXPLAINS THE MANAGEMENT PRINCIPLES, STRUCTURE AND DETAILS YOU NEED TO TRANSFORM YOUR WELDING OPERATIONS FROM A COST CENTER INTO A PROFIT CENTER. MARRIAGE OF TECHNOLOGY AND MANAGEMENT PRINCIPLES-HARDBOUND COPY 2005.01.01 AWS TWM
Handbook on the Ultrasonic Examination of Austenitic Welds 1986.01.01 AWS UEAW
AWS User’s Guide to Filler Metals 2010.01.01 AWS UGFM
ULTRAVIOLET REFLECTANCE OF PAINT 1976.08.06 AWS ULR
Visual Inspection Workshop Reference Manual - Fourth Edition 2008.01.01 AWS VIW-M
Welding Handbook Volume 1 - Welding Science and Technology - Ninth Edition 2001.01.01 AWS WHB-1.9
Welding Handbook - Welding Processes, Part 1 - Volume 2 2004.01.01 AWS WHB-2.9
Welding Handbook - Materials and Applications - Part 1 - Volume 3 1996.01.01 AWS WHB-3.8
Welding Handbook, Vol. 3, Welding Processes, Part 2 - Ninth Edition 2007.01.01 AWS WHB-3.9
Materials and Applications Part 1 - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide 2010.01.01 AWS WHB-4.9
Welding Metallurgy 2001.01.01 AWS WHC1.04
Design for Welding 2001.01.01 AWS WHC1.05
Test Methods for Evaluating Welded Joints 2001.01.01 AWS WHC1.06
Residual Stress and Distortion 2001.01.01 AWS WHC1.07
Symbols for Joining and Inspection 2001.01.01 AWS WHC1.08
Monitoring and Control of Welding and Joining Processes 2001.01.01 AWS WHC1.10
Mechanized, Automated, and Robotic Welding 2001.01.01 AWS WHC1.11
Economics of Welding and Cutting 2001.01.01 AWS WHC1.12
Welding Inspection Handbook - Third Edition 2000.01.01 AWS WI
Welding Inspection Technology - Fifth Edition 2008.01.01 AWS WIT-T
Welding Inspection Technology Wookbook - Fifth Edition 2008.01.01 AWS WIT-W
Welding Metallurgy Volume I, Fundamentals - Fourth Edition 1994.01.01 AWS WM 1.4
WELDING ALUMINUM – QUESTIONS AND ANSWERS – A PRACTICAL GUIDE FOR TROUBLESHOOTING ALUMINUM-RELATED PROBLEMS - SECOND EDITION 2010.01.01 AWS WQA
Welding Zinc-Coated Steel - First Edition 1972.01.01 AWS WZC
Safety in Welding, Cutting and Allied Processes 2012.01.01 AWS Z49.1

 

قابل جستجو بر اساس موضوع ، سال و شماره (کلید Ctrl+F)

آخرین بروز رسانی در چهارشنبه, 17 مهر 1392 ساعت 12:40
 


آدرس  : انتهای حکیم غرب ، بعد از باکری و تعاون ، ساختمان گل یاس پلاک 67 (روبروی تابلوی بازار سنگ تهران)

تلفن تماس:   49720000 (30 خط) E1 فاکس : 49720200     تلفکس: 44163957 (از ساعت 9:00 الی 16)

09121554226 (از ساعت 10 الی 17)

iso17000@gmail.com